Pharm-A-Line I™ – Peristaltic-Pump Tubing

Superior in Peristalic Pump Applications

Manufactured from virgin, medical grade TPE and homogeneously extruded to precise dimensional tolerances, our Pharm-A-Line I tubing was specifically developed to provide superior performance in peristaltic pump applications. Pharm-A-Line I provides an excellent alternative to silicone tubing when resistance to chemicals (such as acetone or methylene chloride) is a concern. Prior to release, we rigorously test each batch of resin for cytotoxicity and heavy metals.

Ideal for Pharmaceutical, Biological, and Food and Beverage Applications

Pharm-A-Line I meets today’s most stringent cytotoxicity and extractability requirements for critical pharmaceutical process applications. It is recommended for most biological process fl uids. Pharm-A-Line I is also ideal for liquid coupler connections between process tanks and fl uidized bed process equipment. Other applications include sterile solutions, buff er agents, and food and beverage processing.

Chemical Resistance
Little or No Effect*
Acetaldehyde Chloroacetic acid Linseed Oil Potassium salts
Acetic acid Chronic acid Magnesiu salt Silver salts
Acetic Anhydride Chromium salts Maleic acid Soap solutions
Acrylonitrile Copper salts Manganese salts Sodium salts
Aluminum Chloride Ethylene glycol Mercury salts Sodium hydroxide 50%
Aluminum sulfate Ethylene glycol Mercury salts Sodium hydroxide 50%
Ammonia Ferric salts Methanol Sodium hypochlorite
Ammonium salts Fluoboric acid Nickel salts Sulfur dioxide
Ammonium hydroxide Fluosilicic acid Nitric acid-10% Sulfuric acid, dil.
Amyl acetate Formaldehyde Nitroethane Sulfurous acid
Antimony salts Formamide Nitrogen oxides Tannic acid
Arsenic salts Formic acid Nitrous acid Tanning extracts
Barium salts Glucose Oils, animal Trisodium phosphate
Benzoic acid Glycerins Oils. mineral Urea
Bleaching liquor Hydrochloric acid Oils. vegetable Uric acid
Boric acid Hydrocyanic acid Oxalic acid Water
Bromine Hydrogen peroxide Oxygen Water (brine)
Butyric acid Hydrogen sulfide Phosphoric acid Water (stoam)
Calcium salts Iodine and solutions Phthalic acid Zinc salts
Carbon Dioxide Lactic acid Phosphoric acid
Chlorine (wet/dry) Lead salts Plating solutions
Minor Effect*
Acetates Butane Me Et Ketone Skydrol 500-B4
Acetone Butanol Nitric acid-30% Sulfuric acid-90%
Alcohols EssentialOils Nitrobenzene Tetrahydrofuran
Amyl alcohol Ethers Oleic acid Turpentine
Aniline Ethanol Phenol
Benzaldehyde Furfural Propanol
Benzyl alcohol Lithium grease Pyridine
Severe Effect-NOT Recommended*
Benzene Cyclohexane Kerosene Nitric acid- 70%
Carbon tetrachloride Ethyl chloride Trichloroethylene Perchloroethylene
Chlorobenzene Freon Lacquer Toluene
Chloroform Gasoline, unleaded Naphtha Xylene


  • Peristaltic pump tubing
  • Buffer Solutions
  • Solvents
  • Metering pumps
  • Fluid Bed Feed Systems
  • Biological Media
  • Filling Machinery
  • Superior pump life
  • Excellent chemical resistance
  • Extremely Flexible
  • Low Particulate Spallation
  • Meets most FDA regulatory requirements
  • Continuous coils
  • Pre cut lengths
  • Clean room packed
  • Pump yoke configurations
  • Available with Sanitary ends
  • Ethylene oxide
  • Autoclave
  • Gamma
  • U.S. Pharmacopoeia Class VI Certification
  • Cytotoxicity Criteria
  • CFR Title 21 Section 177.2600
  • Drug Master File maintained with FDA
  • REACH and RoHS compliant
  • Traceability: Lot and Batch
  • Certification: Lot and Batch
  • Current Good Manufacturing Practices (CGMP)
Additional Data
Specific Gravity (ASTM D792) 0.970
Durometer, Shore A (5SEC.ASTM D2240) 64
Tensile Strength at Break, psi (ASME D-412) 972
Elongation, % (ASTM D-412) 37
Tensile Stress @ 100% Across Flow (73F) (ASTM D-412) 363
Tension Set, % 8%
Tear Resistance Lb./in 128
Compression Set Constant Deflection “B” (22hrs. @ 70° C), % 32
Abrasion Resistance, Mg. lost/1,000 cycles 1.2
Brittle Point, °F (ASTM D-789) -76F
Low Temp. Flex at -40 Passed
Flame Resistance Vertical Plane (Average Burning Rate-cm/min 22
Heat Resistance 275
FDA Reg. No. 21CFR177.2600