1 channel
5 Rollers
Flow rate: 0,0015-800 ml/min
Max Pressure: 2 BAR

Robust aluminium and stainless steel one-channel Laboratory peristaltic pump with flow capacities up to 3,2 l/min.

The QP-1 LAB ASC pump is made of rigid metals to create a robust design. The 5 rollers in the rotor is made of acetal/POM, for high duty applications, ensuring a long life time. The QP-1 OEM pump can be fitted with a variety of different motors, 12 or 24 VDC, BLDC or stepper.

Thanks to it’s multipurpose design the QP-1 LABpump supports a variety of tubing alternatives – including Pharm-A-Line, Pharmed® or Flexilene® (TPE), ClearGreen or Tygon® (PVC), Silicone, Viton® and much more. The QP-1 pump can be fitted with tubes from 1,6mm to 9,5mm as standard. The tube elements with barb fittings offers possibility to connect different inlet and outlet tubing independently of the tube elements inner diameter.

Created For Lab Environments

The included Accurate Speed Control casing is powder coated, ensures high durability and long lifespan. The control board and buttons are optimized for the QP-1 pump and allows for FWD, RWD, Stop, and speed-control functionality. The control board is based on PWM (Pulse-Wide Modulation) with our unique Switch Technology, which achieves up to 90% efficiency. This prevents overheating, removing the need for heat sinks, and allowing you to maintain a stable and exact speed (+/-3%). On the back of the pump is a 9-pin D-sub connector for external start FWD, REV via potentialfree contacts and externel speed control via 4-20mA signal (on request 0-20mA).

Remote cables and/or foot pedals on request.

Voltage in: 24VDC, 100-240VAC power supply included in the product.

Channels 1
Flow rate Min ml/min 0.0015
Flow rate Max ml/min 800
Rpm Min 0.005
Rpm Max 200
Max pressure (BAR) 2
Suction height % 95
Tube loading Barbed Fittings
Motor 12 VDC
24 VDC
Pump Head Materials Anodized Aluminium
Tube ID Min (mm) Tube ID Max (mm) Tube Wall (mm) Tube Material
0.5 9.5
  • 1.6
  • 2.0
  • Pharm-A-Line®
  • PharMed® BPT
  • Norprene®
  • Cleargreen®
  • Tygon®
  • Silicone (Platinum Cured)
  • Viton®

Optimized Pressure and flow
The QP-1 Lab pump head has Oina’s unique dual spring loaded adjustable occlusion which optimizes pressure and increases tube lifetime. The unique design not only allows for low power consumption but also less pulsation and more even pressure control.

Easy Tube Loading
The easy tube loading mechanism ensures easy tube loading and replacement.

Capacity chart
Tube Inner Diameter (mm) Tube Wall Thickness (mm) Flow (ml/rev)
0.8 1.6 0.13
1.6 1.6 0.45
2.4 1.6 0.95
3.2 1.6 1.8
4 1.6 2.2
4.8 1.6 3
6.4 1.6 5
8 1.6 8
9.5 1.6 9